Carbon Fibre Repair Kit - 75g Epoxy Resin with Carbon Fibre - Accessories Included

£9.9
FREE Shipping

Carbon Fibre Repair Kit - 75g Epoxy Resin with Carbon Fibre - Accessories Included

Carbon Fibre Repair Kit - 75g Epoxy Resin with Carbon Fibre - Accessories Included

RRP: £99
Price: £9.9
£9.9 FREE Shipping

In stock

We accept the following payment methods

Description

With yours, as long as the evidence of a crack is gone, I’d just laminate in a couple of layers of ‘sample’ fabric and sand smooth. This kit has been designed to allow for the repair of at least 3 broken fishing rods and so includes sufficient heat shrink tape, resin and carbon fibre fabric to do at least 3 repair jobs. Considering that the original tube probably uses predominantly undirectional carbon fibre in its construction, depending on the nature of the damage, you may even choose to add still more thickness to compensate for the fact that the carbon fibre kit is woven and not unidirectional and therefore adds only half its strength in the direction of the original fibre.

The Peel-Ply is used when the finished repair needs to have a fine textured surface finish (ideal for bonding to) it is used as the last layer on the repair and is torn off after the resin has cured. Of course, this would be more for smaller repairs (or things like side puller reinforcements) and less for larger repairs. Our joke is that the dentist is way more expensive than we are—even if you fall and just chip your tooth, you’re already out way more money than we cost,” he says.I picked up a really cheap carbon Giant Anthem Advanced X with a crack in the frame that I really bought for the parts but wanted to see if I could repair it myself. For repairs where you want a glossy finish, like an external kayak repair, it is not needed and the release film should be used instead.

I made templates from paper before cutting the sheet of carbon, which allowed me to find the perfect size and shape. So, I sanded through 2-3 layers of carbon to create a ‘trough’ then shrink wrapped in 1 x UD and 1 x 90gsm 2k weave then sanded them flush. Place the trimmed carbon fibre fabric into place and apply the epoxy mixture to it using a brush or equivalent.This can introduce more defects than would be seen with such techniques – or with prepreg – in the form of higher porosity levels and greater resin requirements. Whatever you get make sure it is marketed as a laminating epoxy with UV resistance if it is for the frame. If you do, the resin will stick to the good pole and you could have a lot of trouble getting it out again. We provide instructions based on a basic carbon fibre repair - We highly recommend looking at You tube Vids as a good source of instruction, they will show you the steps involved.

KIT INCLUDES: 2x2 Twill 3K Carbon Fiber Cloth that is 36" x 6”, 4 oz of Clear Epoxy Resin, and 4 oz of Clear Epoxy Hardener. Once the surface coat of epoxy was at the appropriate level of tack, it was time to lay down the carbon patches. The Carbon Fibre Rapid Repair Kit combines this advanced resin system with carbon fabric and all the necessary ancillaries to make an instant repair to a damaged carbon fibre or composite vehicle, boat, plane or piece of equipment.Race track days and sailing competitions necessitate the repair patches to bond to the damaged structure without the need for an autoclave or a vacuum bag, although the latter may be more accessible. Providing the damage is not too extensive, such as in your case, and you understand and follow the process properly then there is no reason why you can't use this kit to repair a small area of damage on a carbon bike frame. aff ordable : kits are significantly more affordable than hiring a professional to repair carbon fibre damage . Versatility: Some carbon fiber repair kits are designed for specific applications, such as aerospace or automotive repairs. So you’ve got a broken carbon fibre bike and now you want to repair it well this is the kit for you!

Carbon fibre parts are expensive, so a repair is often preferable if the original properties of that part can be matched in the repair. I got a crack on my seat stay of my road bike and I was wondering if this repair would be suitable for fixing it or I should look for other types of carbon fiber/epoxy? Requiring only competent practical skills and a couple of hours of your time to repair your broken or fractured fishing pole or rod so that it is as strong as it was before the damage occurred. The instructions from my kit said curing time would be 8 hours at 70 degrees (F), but I left it for 24 hours, just to be on the safe side. It is designed to offer more flexibility, avoiding the need to use autoclaves and vacuum bags and offers an extended shelf life as a pre-emptive repair kit when compared to prepreg systems which have shorter shelf lives and less temperature stability.If its cracked but not separated then maybe you’ll still have enough unbroken fibres to maintain its geometry/relative position? This includes: (1) identifying and rectifying the origin of any fracture or damage, (2) the surface must be thoroughly cleaned and degreased, (3) loose carbon fibre debris is removed, and (4) appropriate support is installed before the repair process begins. In some of the videos I watch they say to use a small piece of carbon fiber over the crack and lay a bigger piece of top of it but I think I want to lay like 5 or 6 layers around the whole thing and make them all roughly the same size. However, it is important to be familiar with the material and the repair process before attempting to fix anything.



  • Fruugo ID: 258392218-563234582
  • EAN: 764486781913
  • Sold by: Fruugo

Delivery & Returns

Fruugo

Address: UK
All products: Visit Fruugo Shop